Search results for "Liquid-crystal display"
showing 10 items of 12 documents
Dielectric breakdown of fast switching LCD shutters
2017
Fast liquid crystal optical shutters due to fast switching, vibrationless control and optical properties have found various applications: substitutes for mechanical shutters, 3D active shutter glasses, 3D volumetric displays and more. Switching speed depends not only on properties of liquid crystal, but also on applied electric field intensity. Applied field in the shutters can exceed >10 V/micron which may lead to dielectric breakdown. Therefore, a dielectric thin film is needed between transparent conductive electrodes in order to reduce breakdown probability. In this work we have compared electrical and optical properties of liquid crystal displays with dielectric thin films with thickne…
Role of ambient light in the detection of contrast elements in digital dental radiography.
2018
Objective This study aimed to evaluate the effect of different ambient light levels on observer detection of small contrast differences in a contrast phantom by using a high-end liquid crystal display (LCD) monitor. Study Design An aluminum step wedge was converted into a contrast phantom by the addition of bore holes. Radiographic images of the contrast elements were presented to 20 observers. Images were displayed in random order under different ambient light levels (0, 50, 200, and 500 lux) twice, and the observers had to determine if contrast elements were visible. Sensitivity and specificity were determined to calculate areas under receiver operating characteristic curves and Friedmann…
Design and Implementation of an Electronic Control Unit for a CFR Bi-Fuel Spark Ignition Engine
2017
In this work an Electronic Control Unit for the management of a CFR engine will be described. The engine, which is used both for fuel octane rating (both in terms of RON and MON) and for research purpose, is equipped with a double injection system, with the aim to independently operate both with liquid and gaseous fuels. The developed ECU, hence, is able to control the injections of both kind of fuel, together with the spark ignition. Furthermore the system is also able to measure fuel’s consumption, instantaneous engine speed of rotation and air-fuel ratio, showing all the running parameters both on a local LCD display and on a PC based graphical user interface.
The PLVC display color characterization model revisited
2008
This work proposes a study of the Piecewise Linear assuming Variation in Chromaticity (PLVC) dis- play color characterization model. This model has not been widely used as the improved accuracy compared with the more common PLCC (Piecewise Linear assuming Chromaticity Constancy) model is not significant for CRT (Cathode Ray Tube) display technology, and it requires more computing power than this model. With today's computers, computational complexity is less of a problem, and today's display technologies show a different colori- metric behavior than CRTs. The main contribution of this work is to generalize the PLVC model to multiprimary displays and to provide extensive experimental results…
Accurate color predictability based on a spectral retardance model of a twisted-nematic liquid-crystal display
2011
Abstract In this work we present the application of a simple physical model to accurately predict the broadband spectral transmittance and colorimetric properties of a twisted-nematic liquid crystal display (TNLCD). We spectroscopically calibrate the retardance parameters to evaluate the spectrum of the light transmitted by a TNLCD sandwiched between two linear polarizers. When the TNLCD is illuminated with a broadband light source, the full spectrum can be predicted as a function of the addressed gray level for any arbitrary orientation of the polarizers. Thus, the color of the transmitted light can be also be estimated with very good accuracy. As an example, a polarizers' configuration is…
Nanostructured CdO thin films for water treatments
2016
Abstract CdO was the very first transparent conducting metal oxide discovered. CdO thin films show electrical and optical properties of interest as photosensitive anode materials for photochemical cells, phototransistors, photodiodes, window electrodes in liquid crystal displays, IR detectors, antireflection coatings, gas sensors and in other solar energy applications. In the present study we report on the spectroscopic, microscopic, electrical and photo-catalytic properties of CdO thin films prepared by a metal organic chemical vapor method. The degenerate semiconducting CdO thin films are useful as photocatalysts for water treatments.
Low-cost, portable open-source gas monitoring device based on chemosensory technology
2015
[EN] We report herein the construction of an electronic device to perform the real-time digitalization of the color state of the optical chemosensors used in the detection of dangerous gases. To construct the device, we used open-source modular electronics, such as Arduino and Sparkfun components, as well as free and open-source software (FOSS). The basic principle of the operation of this device is the continuous color measurement of a chemosensor-doped sensing film, whose color changes in the presence of a specific gas. The chemosensor-sensing film can be prepared by using any of the widely available chemosensors for the desired gas. Color measurement is taken by two TCS230 color sensor I…
Generalized formulation and symmetry properties of reciprocal nonabsorbing polarization devices: Application to liquid-crystal displays
2000
We present a general formulation based on the Jones-matrix theory for reciprocal nonabsorbing polarization devices, including polarization interference filters and liquid-crystal displays. The development of this formulation is based on general symmetry conditions that relate the Jones matrix when the device is illuminated from the front side and from the back side. The application to liquid-crystal displays results in a constraint of the Jones-matrix elements, which represents a generalization of the existing models that explain their modulation properties.
Twist angle determination in liquid crystal displays by location of local adiabatic points
1998
In this work we present a method for the determination of the twist angle of an arbitrary twisted nematic liquid crystal spatial light modulator. The method is based on the location of local adiabatic points, i.e., situations in which the liquid crystal SLM acts only as a rotation device. For these cases, the rotation induced on the polarization of the incident beam is equal to the twist angle. Consequently, the twist angle can be determined with high precision. We show that local adiabatic regime may be achieved in two ways, either by changing the incident beam wavelength, or by applying a voltage to the electrodes of the display. However, the simple model that describes the SLM in the off…
Reconfigurable Shack-Hartmann sensor without moving elements.
2010
We demonstrate wavefront sensing with variable measurement sensitivity and dynamic range by means of a programmable microlens array implemented onto an off-the-shelf twisted nematic liquid crystal display operating as a phase-only spatial light modulator. Electronic control of the optical power of a liquid lens inserted at the aperture stop of a telecentric relay system allows sensing reconfigurability without moving components. Results of laboratory experiments show the ability of the setup to detect both smooth and highly aberrated wavefronts with adequate sensitivity.